Skip to main content

ParametersRegistry

Deployed contracts​

ModuleMainnet
CMv20xffC1C5d59CeAC6F6c27E701F04a70cb50474607C
CSM0x9D28ad303C90DF524BA960d7a2DAC56DcC31e428

ParametersRegistry is a supplementary contract that stores configurable parameters associated with Node Operator types, represented by bond curve IDs. It provides defaults and optional per-curve overrides for key limits, reward shares, performance and strike settings, general penalties, and validator-exit parameters. Contracts including the module contract (CuratedModule or CSModule), ValidatorStrikes, and ExitPenalties retrieve the custom value when one is configured and the default otherwise.

Except for values expressed in basis points, the setters intentionally impose no upper limits because Dual Governance allows stETH holders to object to malicious governance changes.

Upgradability​

The contract uses OssifiableProxy for upgradability.

State Variables​

INITIALIZED_VERSION​

uint64 internal constant INITIALIZED_VERSION = 3

MANAGE_GENERAL_PENALTIES_AND_CHARGES_ROLE​

bytes32 public constant MANAGE_GENERAL_PENALTIES_AND_CHARGES_ROLE =
    keccak256("MANAGE_GENERAL_PENALTIES_AND_CHARGES_ROLE")

MANAGE_KEYS_LIMIT_ROLE​

bytes32 public constant MANAGE_KEYS_LIMIT_ROLE = keccak256("MANAGE_KEYS_LIMIT_ROLE")

MANAGE_QUEUE_CONFIG_ROLE​

bytes32 public constant MANAGE_QUEUE_CONFIG_ROLE = keccak256("MANAGE_QUEUE_CONFIG_ROLE")

MANAGE_PERFORMANCE_PARAMETERS_ROLE​

bytes32 public constant MANAGE_PERFORMANCE_PARAMETERS_ROLE = keccak256("MANAGE_PERFORMANCE_PARAMETERS_ROLE")

MANAGE_REWARD_SHARE_ROLE​

bytes32 public constant MANAGE_REWARD_SHARE_ROLE = keccak256("MANAGE_REWARD_SHARE_ROLE")

MANAGE_VALIDATOR_EXIT_PARAMETERS_ROLE​

bytes32 public constant MANAGE_VALIDATOR_EXIT_PARAMETERS_ROLE = keccak256("MANAGE_VALIDATOR_EXIT_PARAMETERS_ROLE")

MANAGE_CURVE_PARAMETERS_ROLE​

bytes32 public constant MANAGE_CURVE_PARAMETERS_ROLE = keccak256("MANAGE_CURVE_PARAMETERS_ROLE")

MAX_BP​

Maximal value for basis points (BP) 1 BP = 0.01%

uint256 internal constant MAX_BP = 10000

QUEUE_LOWEST_PRIORITY​

QUEUE_LOWEST_PRIORITY identifies the range of available priorities: [0; QUEUE_LOWEST_PRIORITY]. Unused in CuratedModule.sol

uint256 public immutable QUEUE_LOWEST_PRIORITY

defaultKeyRemovalCharge​

Key removal charge is not used in Curated Module

uint256 public defaultKeyRemovalCharge

_keyRemovalCharges​

mapping(uint256 curveId => MarkedUint248) internal _keyRemovalCharges

defaultGeneralDelayedPenaltyAdditionalFine​

uint256 public defaultGeneralDelayedPenaltyAdditionalFine

_generalDelayedPenaltyAdditionalFines​

mapping(uint256 curveId => MarkedUint248) internal _generalDelayedPenaltyAdditionalFines

defaultKeysLimit​

uint256 public defaultKeysLimit

_keysLimits​

mapping(uint256 curveId => MarkedUint248) internal _keysLimits

defaultQueueConfig​

Queue config is not used in Curated Module

QueueConfig public defaultQueueConfig

_queueConfigs​

mapping(uint256 curveId => QueueConfig) internal _queueConfigs

defaultRewardShare​

Default value for the reward share. Can only be set as a flat value due to possible sybil attacks Decreased reward share for some validators > N will promote sybils. Increased reward share for validators > N will give large operators an advantage

uint256 public defaultRewardShare

_rewardShareData​

mapping(uint256 curveId => KeyNumberValueInterval[]) internal _rewardShareData

defaultPerformanceLeeway​

Default value for the performance leeway. Can only be set as a flat value due to possible sybil attacks Decreased performance leeway for some validators > N will promote sybils. Increased performance leeway for validators > N will give large operators an advantage

uint256 public defaultPerformanceLeeway

_performanceLeewayData​

mapping(uint256 curveId => KeyNumberValueInterval[]) internal _performanceLeewayData

defaultStrikesParams​

StrikesParams public defaultStrikesParams

_strikesParams​

mapping(uint256 curveId => StrikesParams) internal _strikesParams

defaultBadPerformancePenalty​

uint256 public defaultBadPerformancePenalty

_badPerformancePenalties​

mapping(uint256 curveId => MarkedUint248) internal _badPerformancePenalties

defaultPerformanceCoefficients​

PerformanceCoefficients public defaultPerformanceCoefficients

_performanceCoefficients​

mapping(uint256 curveId => PerformanceCoefficients) internal _performanceCoefficients

defaultAllowedExitDelay​

uint256 public defaultAllowedExitDelay

_allowedExitDelay​

mapping(uint256 => uint256) internal _allowedExitDelay

defaultExitDelayFee​

uint256 public defaultExitDelayFee

_exitDelayFees​

mapping(uint256 => MarkedUint248) internal _exitDelayFees

defaultMaxElWithdrawalRequestFee​

uint256 public defaultMaxElWithdrawalRequestFee

_maxElWithdrawalRequestFees​

mapping(uint256 => MarkedUint248) internal _maxElWithdrawalRequestFees

Functions​

onlyRoleMemberOrAdmin​

modifier onlyRoleMemberOrAdmin(bytes32 role) ;

onlyRoleMemberOrCurveParametersRoleOrAdmin​

modifier onlyRoleMemberOrCurveParametersRoleOrAdmin(bytes32 role) ;

constructor​

constructor(uint256 queueLowestPriority) ;

Parameters

NameTypeDescription
queueLowestPriorityuint256The lowest priority value for the queue. Set to 0 for modules that don't use queue priorities.

initialize​

Initialize contract from scratch. In case of a method call frontrun, the contract instance should be discarded. It is recommended to call this method in the same transaction as the deployment transaction and perform extensive deployment verification before using the contract instance.

function initialize(address admin, InitializationData calldata data) external reinitializer(INITIALIZED_VERSION);

finalizeUpgradeV3​

This method is expected to be called only when the contract is upgraded from version 2 to version 3 for the existing version 2 deployment. If the version 3 contract is deployed from scratch, the initialize method should be used instead. To prevent possible frontrun this method should strictly be called in the same TX as the upgrade transaction and should not be called separately.

function finalizeUpgradeV3() external reinitializer(INITIALIZED_VERSION);

setDefaultKeyRemovalCharge​

Set default value for the key removal charge. Default value is used if a specific value is not set for the curveId. This parameter is not used in Curated Module

function setDefaultKeyRemovalCharge(uint256 keyRemovalCharge)
    external
    onlyRoleMemberOrAdmin(MANAGE_GENERAL_PENALTIES_AND_CHARGES_ROLE);

Parameters

NameTypeDescription
keyRemovalChargeuint256Value to be set as default for the key removal charge

setDefaultGeneralDelayedPenaltyAdditionalFine​

Set default value for the general delayed penalty additional fine. Default value is used if a specific value is not set for the curveId

function setDefaultGeneralDelayedPenaltyAdditionalFine(uint256 fine)
    external
    onlyRoleMemberOrAdmin(MANAGE_GENERAL_PENALTIES_AND_CHARGES_ROLE);

Parameters

NameTypeDescription
fineuint256Value to be set as default for the general delayed penalty additional fine

setDefaultKeysLimit​

Set default value for the keys limit. Default value is used if a specific value is not set for the curveId

function setDefaultKeysLimit(uint256 limit) external onlyRoleMemberOrAdmin(MANAGE_KEYS_LIMIT_ROLE);

Parameters

NameTypeDescription
limituint256Value to be set as default for the keys limit

setDefaultQueueConfig​

Set default value for QueueConfig. Default value is used if a specific value is not set for the curveId. This parameter is not used in Curated Module

function setDefaultQueueConfig(uint256 priority, uint256 maxDeposits)
    external
    onlyRoleMemberOrAdmin(MANAGE_QUEUE_CONFIG_ROLE);

Parameters

NameTypeDescription
priorityuint256Queue priority.
maxDepositsuint256Maximum number of the first deposits a Node Operator can get via the priority queue. Ex. with maxDeposits = 10 the Node Operator сan get keys added to the priority queue until the Node Operator has totalDepositedKeys + enqueued >= 10.

setDefaultRewardShare​

Set default value for the reward share. Default value is used if a specific value is not set for the curveId

function setDefaultRewardShare(uint256 share) external onlyRoleMemberOrAdmin(MANAGE_REWARD_SHARE_ROLE);

Parameters

NameTypeDescription
shareuint256Value to be set as default for the reward share

setDefaultPerformanceLeeway​

Set default value for the performance leeway. Default value is used if a specific value is not set for the curveId

function setDefaultPerformanceLeeway(uint256 leeway)
    external
    onlyRoleMemberOrAdmin(MANAGE_PERFORMANCE_PARAMETERS_ROLE);

Parameters

NameTypeDescription
leewayuint256Value to be set as default for the performance leeway

setDefaultStrikesParams​

Set default values for the strikes lifetime and threshold. Default values are used if specific values are not set for the curveId

function setDefaultStrikesParams(uint256 lifetime, uint256 threshold)
    external
    onlyRoleMemberOrAdmin(MANAGE_PERFORMANCE_PARAMETERS_ROLE);

Parameters

NameTypeDescription
lifetimeuint256The default number of Performance Oracle frames to store strikes values
thresholduint256The default strikes value leading to validator force ejection.

setDefaultBadPerformancePenalty​

Set the default value for the bad performance penalty for a single 32 ether validator This value is used if a specific value is not set for the curveId

function setDefaultBadPerformancePenalty(uint256 penalty)
    external
    onlyRoleMemberOrAdmin(MANAGE_PERFORMANCE_PARAMETERS_ROLE);

Parameters

NameTypeDescription
penaltyuint256Value to be set as default for the bad performance penalty

setDefaultPerformanceCoefficients​

Set default values for the performance coefficients. Default values are used if specific values are not set for the curveId

function setDefaultPerformanceCoefficients(uint256 attestationsWeight, uint256 blocksWeight, uint256 syncWeight)
    external
    onlyRoleMemberOrAdmin(MANAGE_PERFORMANCE_PARAMETERS_ROLE);

Parameters

NameTypeDescription
attestationsWeightuint256Value to be set as default for the attestations effectiveness weight
blocksWeightuint256Value to be set as default for block proposals effectiveness weight
syncWeightuint256Value to be set as default for sync participation effectiveness weight

setDefaultAllowedExitDelay​

set default value for the allowed exit delay in seconds. Default value is used if a specific value is not set for the curveId

function setDefaultAllowedExitDelay(uint256 delay)
    external
    onlyRoleMemberOrAdmin(MANAGE_VALIDATOR_EXIT_PARAMETERS_ROLE);

Parameters

NameTypeDescription
delayuint256Value to be set as default for the allowed exit delay

setDefaultExitDelayFee​

Set the default value for exit delay penalty for a single 32 ether validator This value is used if a specific value is not set for the curveId

function setDefaultExitDelayFee(uint256 fee) external onlyRoleMemberOrAdmin(MANAGE_VALIDATOR_EXIT_PARAMETERS_ROLE);

Parameters

NameTypeDescription
feeuint256The value to be set as default for the exit delay fee

setDefaultMaxElWithdrawalRequestFee​

set default value for max EL withdrawal request fee. Default value is used if a specific value is not set for the curveId

function setDefaultMaxElWithdrawalRequestFee(uint256 fee)
    external
    onlyRoleMemberOrAdmin(MANAGE_VALIDATOR_EXIT_PARAMETERS_ROLE);

Parameters

NameTypeDescription
feeuint256Value to be set as default for the max EL withdrawal request fee

setKeyRemovalCharge​

Set key removal charge for the curveId. This parameter is not used in Curated Module

function setKeyRemovalCharge(uint256 curveId, uint256 keyRemovalCharge)
    external
    onlyRoleMemberOrCurveParametersRoleOrAdmin(MANAGE_GENERAL_PENALTIES_AND_CHARGES_ROLE);

Parameters

NameTypeDescription
curveIduint256Curve Id to associate key removal charge with
keyRemovalChargeuint256Key removal charge

setGeneralDelayedPenaltyAdditionalFine​

Set general delayed penalty additional fine for the curveId.

function setGeneralDelayedPenaltyAdditionalFine(uint256 curveId, uint256 fine)
    external
    onlyRoleMemberOrCurveParametersRoleOrAdmin(MANAGE_GENERAL_PENALTIES_AND_CHARGES_ROLE);

Parameters

NameTypeDescription
curveIduint256Curve Id to associate general delayed penalty additional fine limit with
fineuint256General delayed penalty additional fine

setKeysLimit​

Set keys limit for the curveId.

function setKeysLimit(uint256 curveId, uint256 limit)
    external
    onlyRoleMemberOrCurveParametersRoleOrAdmin(MANAGE_KEYS_LIMIT_ROLE);

Parameters

NameTypeDescription
curveIduint256Curve Id to associate keys limit with
limituint256Keys limit

setQueueConfig​

Sets the provided config to the given curve. This parameter is not used in Curated Module

function setQueueConfig(uint256 curveId, uint256 priority, uint256 maxDeposits)
    external
    onlyRoleMemberOrCurveParametersRoleOrAdmin(MANAGE_QUEUE_CONFIG_ROLE);

Parameters

NameTypeDescription
curveIduint256Curve Id to set the config.
priorityuint256Queue priority.
maxDepositsuint256Maximum number of the first deposits a Node Operator can get via the priority queue. Ex. with maxDeposits = 10 the Node Operator сan get keys added to the priority queue until the Node Operator has totalDepositedKeys + enqueued >= 10.

setRewardShareData​

Set reward share parameters for the curveId

KeyNumberValueInterval = [[1, 10000], [11, 8000], [51, 5000]] stands for 100% rewards for the first 10 keys, 80% rewards for the keys 11-50, and 50% rewards for the keys > 50

function setRewardShareData(uint256 curveId, KeyNumberValueInterval[] calldata data)
    external
    onlyRoleMemberOrCurveParametersRoleOrAdmin(MANAGE_REWARD_SHARE_ROLE);

Parameters

NameTypeDescription
curveIduint256Curve Id to associate reward share data with
dataKeyNumberValueInterval[]Interval values for keys count and reward share percentages in BP (ex. [[1, 10000], [11, 8000], [51, 5000]])

setPerformanceLeewayData​

Set performance leeway parameters for the curveId

KeyNumberValueInterval = [[1, 500], [101, 450], [501, 400]] stands for 5% performance leeway for the first 100 keys, 4.5% performance leeway for the keys 101-500, and 4% performance leeway for the keys > 500

function setPerformanceLeewayData(uint256 curveId, KeyNumberValueInterval[] calldata data)
    external
    onlyRoleMemberOrCurveParametersRoleOrAdmin(MANAGE_PERFORMANCE_PARAMETERS_ROLE);

Parameters

NameTypeDescription
curveIduint256Curve Id to associate performance leeway data with
dataKeyNumberValueInterval[]Interval values for keys count and performance leeway percentages in BP (ex. [[1, 500], [101, 450], [501, 400]])

setStrikesParams​

Set performance strikes lifetime and threshold for the curveId

function setStrikesParams(uint256 curveId, uint256 lifetime, uint256 threshold)
    external
    onlyRoleMemberOrCurveParametersRoleOrAdmin(MANAGE_PERFORMANCE_PARAMETERS_ROLE);

Parameters

NameTypeDescription
curveIduint256Curve Id to associate performance strikes lifetime and threshold with
lifetimeuint256Number of Performance Oracle frames to store strikes values
thresholduint256The strikes value leading to validator force ejection

setBadPerformancePenalty​

Set the bad performance penalty for the curveId for a single 32 ether validator

function setBadPerformancePenalty(uint256 curveId, uint256 penalty)
    external
    onlyRoleMemberOrCurveParametersRoleOrAdmin(MANAGE_PERFORMANCE_PARAMETERS_ROLE);

Parameters

NameTypeDescription
curveIduint256Curve Id to associate bad performance penalty with
penaltyuint256Bad performance penalty

setPerformanceCoefficients​

Set performance coefficients for the curveId

function setPerformanceCoefficients(
    uint256 curveId,
    uint256 attestationsWeight,
    uint256 blocksWeight,
    uint256 syncWeight
) external onlyRoleMemberOrCurveParametersRoleOrAdmin(MANAGE_PERFORMANCE_PARAMETERS_ROLE);

Parameters

NameTypeDescription
curveIduint256Curve Id to associate performance coefficients with
attestationsWeightuint256Attestations effectiveness weight
blocksWeightuint256Block proposals effectiveness weight
syncWeightuint256Sync participation effectiveness weight

setAllowedExitDelay​

Set allowed exit delay for the curveId in seconds

function setAllowedExitDelay(uint256 curveId, uint256 delay)
    external
    onlyRoleMemberOrCurveParametersRoleOrAdmin(MANAGE_VALIDATOR_EXIT_PARAMETERS_ROLE);

Parameters

NameTypeDescription
curveIduint256Curve Id to associate allowed exit delay with
delayuint256Allowed exit delay

setExitDelayFee​

Set the exit delay penalty for a single 32 ether validator for the given curveId

function setExitDelayFee(uint256 curveId, uint256 fee)
    external
    onlyRoleMemberOrCurveParametersRoleOrAdmin(MANAGE_VALIDATOR_EXIT_PARAMETERS_ROLE);

Parameters

NameTypeDescription
curveIduint256Curve Id to associate exit delay penalty with
feeuint256Exit delay fee

setMaxElWithdrawalRequestFee​

Set max EL withdrawal request fee for the curveId

function setMaxElWithdrawalRequestFee(uint256 curveId, uint256 fee)
    external
    onlyRoleMemberOrCurveParametersRoleOrAdmin(MANAGE_VALIDATOR_EXIT_PARAMETERS_ROLE);

Parameters

NameTypeDescription
curveIduint256Curve Id to associate max EL withdrawal request fee with
feeuint256Max EL withdrawal request fee

unsetKeyRemovalCharge​

Unset key removal charge for the curveId. This parameter is not used in Curated Module

function unsetKeyRemovalCharge(uint256 curveId)
    external
    onlyRoleMemberOrCurveParametersRoleOrAdmin(MANAGE_GENERAL_PENALTIES_AND_CHARGES_ROLE);

Parameters

NameTypeDescription
curveIduint256Curve Id to unset custom key removal charge for

unsetGeneralDelayedPenaltyAdditionalFine​

Unset general delayed penalty additional fine for the curveId

function unsetGeneralDelayedPenaltyAdditionalFine(uint256 curveId)
    external
    onlyRoleMemberOrCurveParametersRoleOrAdmin(MANAGE_GENERAL_PENALTIES_AND_CHARGES_ROLE);

Parameters

NameTypeDescription
curveIduint256Curve Id to unset custom general delayed penalty additional fine for

unsetKeysLimit​

Unset keys limit for the curveId

function unsetKeysLimit(uint256 curveId)
    external
    onlyRoleMemberOrCurveParametersRoleOrAdmin(MANAGE_KEYS_LIMIT_ROLE);

Parameters

NameTypeDescription
curveIduint256Curve Id to unset custom keys limit for

unsetQueueConfig​

Set the given curve's config to the default one. This parameter is not used in Curated Module

function unsetQueueConfig(uint256 curveId)
    external
    onlyRoleMemberOrCurveParametersRoleOrAdmin(MANAGE_QUEUE_CONFIG_ROLE);

Parameters

NameTypeDescription
curveIduint256Curve Id to unset custom config.

unsetRewardShareData​

Unset reward share parameters for the curveId

function unsetRewardShareData(uint256 curveId)
    external
    onlyRoleMemberOrCurveParametersRoleOrAdmin(MANAGE_REWARD_SHARE_ROLE);

Parameters

NameTypeDescription
curveIduint256Curve Id to unset custom reward share parameters for

unsetPerformanceLeewayData​

Unset performance leeway parameters for the curveId

function unsetPerformanceLeewayData(uint256 curveId)
    external
    onlyRoleMemberOrCurveParametersRoleOrAdmin(MANAGE_PERFORMANCE_PARAMETERS_ROLE);

Parameters

NameTypeDescription
curveIduint256Curve Id to unset custom performance leeway parameters for

unsetStrikesParams​

Unset custom performance strikes lifetime and threshold for the curveId

function unsetStrikesParams(uint256 curveId)
    external
    onlyRoleMemberOrCurveParametersRoleOrAdmin(MANAGE_PERFORMANCE_PARAMETERS_ROLE);

Parameters

NameTypeDescription
curveIduint256Curve Id to unset custom performance strikes lifetime and threshold for

unsetBadPerformancePenalty​

Unset bad performance penalty for the curveId

function unsetBadPerformancePenalty(uint256 curveId)
    external
    onlyRoleMemberOrCurveParametersRoleOrAdmin(MANAGE_PERFORMANCE_PARAMETERS_ROLE);

Parameters

NameTypeDescription
curveIduint256Curve Id to unset custom bad performance penalty for

unsetPerformanceCoefficients​

Unset custom performance coefficients for the curveId

function unsetPerformanceCoefficients(uint256 curveId)
    external
    onlyRoleMemberOrCurveParametersRoleOrAdmin(MANAGE_PERFORMANCE_PARAMETERS_ROLE);

Parameters

NameTypeDescription
curveIduint256Curve Id to unset custom performance coefficients for

unsetAllowedExitDelay​

Unset allowed exit delay for the curveId

function unsetAllowedExitDelay(uint256 curveId)
    external
    onlyRoleMemberOrCurveParametersRoleOrAdmin(MANAGE_VALIDATOR_EXIT_PARAMETERS_ROLE);

Parameters

NameTypeDescription
curveIduint256Curve Id to unset allowed exit delay for

unsetExitDelayFee​

Unset exit delay penalty for the curveId

function unsetExitDelayFee(uint256 curveId)
    external
    onlyRoleMemberOrCurveParametersRoleOrAdmin(MANAGE_VALIDATOR_EXIT_PARAMETERS_ROLE);

Parameters

NameTypeDescription
curveIduint256The curve ID for unsetting the exit delay fee

unsetMaxElWithdrawalRequestFee​

Unset max EL withdrawal request fee for the curveId

function unsetMaxElWithdrawalRequestFee(uint256 curveId)
    external
    onlyRoleMemberOrCurveParametersRoleOrAdmin(MANAGE_VALIDATOR_EXIT_PARAMETERS_ROLE);

Parameters

NameTypeDescription
curveIduint256Curve Id to unset max EL withdrawal request fee for

getKeyRemovalCharge​

Get key removal charge by the curveId. A charge is taken from the bond for each removed key from the module. This parameter is not used in Curated Module

defaultKeyRemovalCharge is returned if the value is not set for the given curveId.

function getKeyRemovalCharge(uint256 curveId) external view returns (uint256 keyRemovalCharge);

Parameters

NameTypeDescription
curveIduint256Curve Id to get key removal charge for

Returns

NameTypeDescription
keyRemovalChargeuint256Key removal charge

getGeneralDelayedPenaltyAdditionalFine​

Get general delayed penalty additional fine by the curveId. Additional fine is added to the general delayed penalty by CSM

defaultGeneralDelayedPenaltyAdditionalFine is returned if the value is not set for the given curveId.

function getGeneralDelayedPenaltyAdditionalFine(uint256 curveId) external view returns (uint256 fine);

Parameters

NameTypeDescription
curveIduint256Curve Id to get general delayed penalty additional fine for

Returns

NameTypeDescription
fineuint256General delayed penalty additional fine

getKeysLimit​

Get keys limit by the curveId. A limit indicates the maximal amount of the non-withdrawn keys Node Operator can upload

defaultKeysLimit is returned if the value is not set for the given curveId.

function getKeysLimit(uint256 curveId) external view returns (uint256 limit);

Parameters

NameTypeDescription
curveIduint256Curve Id to get keys limit for

Returns

NameTypeDescription
limituint256Keys limit

getQueueConfig​

Get the queue config for the given curve. This parameter is not used in Curated Module

function getQueueConfig(uint256 curveId) external view returns (uint32 priority, uint32 maxDeposits);

Parameters

NameTypeDescription
curveIduint256Curve Id to get the queue config for.

Returns

NameTypeDescription
priorityuint32Queue priority.
maxDepositsuint32Maximum number of the first deposits a Node Operator can get via the priority queue. Ex. with maxDeposits = 10 the Node Operator сan get keys added to the priority queue until the Node Operator has totalDepositedKeys + enqueued >= 10.

getRewardShareData​

Get reward share parameters by the curveId.

Returns [[1, defaultRewardShare]] if no intervals are set for the given curveId.

function getRewardShareData(uint256 curveId) external view returns (KeyNumberValueInterval[] memory data);

Parameters

NameTypeDescription
curveIduint256Curve Id to get reward share data for

Returns

NameTypeDescription
dataKeyNumberValueInterval[]Interval values for keys count and reward share percentages in BP (ex. [[1, 10000], [11, 8000], [51, 5000]])

getPerformanceLeewayData​

Get performance leeway parameters by the curveId

Returns [[1, defaultPerformanceLeeway]] if no intervals are set for the given curveId.

function getPerformanceLeewayData(uint256 curveId) external view returns (KeyNumberValueInterval[] memory data);

Parameters

NameTypeDescription
curveIduint256Curve Id to get performance leeway data for

Returns

NameTypeDescription
dataKeyNumberValueInterval[]Interval values for keys count and performance leeway percentages in BP (ex. [[1, 500], [101, 450], [501, 400]])

getStrikesParams​

Get performance strikes lifetime and threshold by the curveId

defaultStrikesParams are returned if the value is not set for the given curveId

function getStrikesParams(uint256 curveId) external view returns (uint256 lifetime, uint256 threshold);

Parameters

NameTypeDescription
curveIduint256Curve Id to get performance strikes lifetime and threshold for

Returns

NameTypeDescription
lifetimeuint256Number of Performance Oracle frames to store strikes values
thresholduint256The strikes value leading to validator force ejection

getBadPerformancePenalty​

Get bad performance penalty for a single 32 ether validator by the curveId

defaultBadPerformancePenalty is returned if the value is not set for the given curveId.

function getBadPerformancePenalty(uint256 curveId) external view returns (uint256 penalty);

Parameters

NameTypeDescription
curveIduint256Curve Id to get bad performance penalty for

Returns

NameTypeDescription
penaltyuint256Bad performance penalty

getPerformanceCoefficients​

Get performance coefficients by the curveId

defaultPerformanceCoefficients are returned if the value is not set for the given curveId.

function getPerformanceCoefficients(uint256 curveId)
    external
    view
    returns (uint256 attestationsWeight, uint256 blocksWeight, uint256 syncWeight);

Parameters

NameTypeDescription
curveIduint256Curve Id to get performance coefficients for

Returns

NameTypeDescription
attestationsWeightuint256Attestations effectiveness weight
blocksWeightuint256Block proposals effectiveness weight
syncWeightuint256Sync participation effectiveness weight

getAllowedExitDelay​

Get allowed exit delay by the curveId in seconds

defaultAllowedExitDelay is returned if the value is not set for the given curveId.

function getAllowedExitDelay(uint256 curveId) external view returns (uint256 delay);

Parameters

NameTypeDescription
curveIduint256Curve Id to get allowed exit delay for

getExitDelayFee​

Get exit delay penalty for a single 32 ether validator by the curveId

defaultExitDelayFee is returned if the value is not set for the given curveId.

function getExitDelayFee(uint256 curveId) external view returns (uint256 penalty);

Parameters

NameTypeDescription
curveIduint256Curve ID to get the exit delay fee for

getMaxElWithdrawalRequestFee​

Get max EL withdrawal request fee by the curveId

defaultMaxElWithdrawalRequestFee is returned if the value is not set for the given curveId.

function getMaxElWithdrawalRequestFee(uint256 curveId) external view returns (uint256 fee);

Parameters

NameTypeDescription
curveIduint256Curve Id to get max EL withdrawal request fee for

getCurveParameters​

Get all parameters resolved for the given curveId in one call

Per-curve values are returned where set, otherwise defaults are used

function getCurveParameters(uint256 curveId) external view returns (CurveParameters memory params);

Parameters

NameTypeDescription
curveIduint256Curve Id to get all parameters for

Returns

NameTypeDescription
paramsCurveParametersAll resolved parameters for the given curveId

getInitializedVersion​

Returns the initialized version of the contract

function getInitializedVersion() external view returns (uint64);

_setDefaultKeyRemovalCharge​

function _setDefaultKeyRemovalCharge(uint256 keyRemovalCharge) internal;

_setDefaultGeneralDelayedPenaltyAdditionalFine​

function _setDefaultGeneralDelayedPenaltyAdditionalFine(uint256 fine) internal;

_setDefaultKeysLimit​

function _setDefaultKeysLimit(uint256 limit) internal;

_setDefaultRewardShare​

function _setDefaultRewardShare(uint256 share) internal;

_setDefaultPerformanceLeeway​

function _setDefaultPerformanceLeeway(uint256 leeway) internal;

_setDefaultStrikesParams​

function _setDefaultStrikesParams(uint256 lifetime, uint256 threshold) internal;

_setDefaultBadPerformancePenalty​

function _setDefaultBadPerformancePenalty(uint256 penalty) internal;

_setDefaultPerformanceCoefficients​

function _setDefaultPerformanceCoefficients(uint256 attestationsWeight, uint256 blocksWeight, uint256 syncWeight)
    internal;

_setDefaultQueueConfig​

function _setDefaultQueueConfig(uint256 priority, uint256 maxDeposits) internal;

_setDefaultAllowedExitDelay​

function _setDefaultAllowedExitDelay(uint256 delay) internal;

_setDefaultExitDelayFee​

function _setDefaultExitDelayFee(uint256 penalty) internal;

_setDefaultMaxElWithdrawalRequestFee​

function _setDefaultMaxElWithdrawalRequestFee(uint256 fee) internal;

_getKeyRemovalCharge​

function _getKeyRemovalCharge(uint256 curveId) internal view returns (uint256);

_getGeneralDelayedPenaltyAdditionalFine​

function _getGeneralDelayedPenaltyAdditionalFine(uint256 curveId) internal view returns (uint256);

_getKeysLimit​

function _getKeysLimit(uint256 curveId) internal view returns (uint256);

_getQueueConfig​

function _getQueueConfig(uint256 curveId) internal view returns (uint32, uint32);

_getRewardShareData​

function _getRewardShareData(uint256 curveId) internal view returns (KeyNumberValueInterval[] memory data);

_getPerformanceLeewayData​

function _getPerformanceLeewayData(uint256 curveId) internal view returns (KeyNumberValueInterval[] memory data);

_getStrikesParams​

function _getStrikesParams(uint256 curveId) internal view returns (uint256, uint256);

_getBadPerformancePenalty​

function _getBadPerformancePenalty(uint256 curveId) internal view returns (uint256);

_getPerformanceCoefficients​

function _getPerformanceCoefficients(uint256 curveId) internal view returns (uint256, uint256, uint256);

_getAllowedExitDelay​

function _getAllowedExitDelay(uint256 curveId) internal view returns (uint256 delay);

_getExitDelayFee​

function _getExitDelayFee(uint256 curveId) internal view returns (uint256);

_getMaxElWithdrawalRequestFee​

function _getMaxElWithdrawalRequestFee(uint256 curveId) internal view returns (uint256);

_onlyRoleMemberOrAdmin​

function _onlyRoleMemberOrAdmin(bytes32 role) internal view;

_onlyRoleMemberOrCurveParametersRoleOrAdmin​

function _onlyRoleMemberOrCurveParametersRoleOrAdmin(bytes32 role) internal view;

_validateQueueConfig​

function _validateQueueConfig(uint256 priority, uint256 maxDeposits) internal view;

_validateStrikesParams​

function _validateStrikesParams(uint256 lifetime, uint256 threshold) internal pure;

_validateAllowedExitDelay​

function _validateAllowedExitDelay(uint256 delay) internal pure;

_validatePerformanceCoefficients​

function _validatePerformanceCoefficients(uint256 attestationsWeight, uint256 blocksWeight, uint256 syncWeight)
    internal
    pure;

_validateKeyNumberValueIntervals​

function _validateKeyNumberValueIntervals(KeyNumberValueInterval[] calldata intervals) private pure;